- (267) 626-5473
- abpressuresolutions@gmail.com
- Mon-Sun, 9 AM - 5 PM
Serving 17 Indianapolis-area communities
Serving 17 Indianapolis-area communities
Full-pressure cleaning for the hard surfaces around your property. Concrete, brick, pavers and masonry, cleared of years of grime in a single visit.
We reply within one business day. No deposit needed.
No deposit needed. We reply within one business day.
Pressure washing is the right tool when a surface can take real force. Concrete driveways, brick walls, paver patios and poured walkways all hold dirt deep in their pores. A garden hose moves the surface layer around. Pressure moves what is underneath it.
We set the machine to the surface, not the other way round. A sealed stamped driveway gets a different tip and a different distance than a forty-year-old sidewalk. We test a small area first, confirm the surface responds the way we expect, then work the whole run in even passes so you never see stripes where one pass overlapped another.
Grey concrete comes back several shades lighter. It is the cheapest visible upgrade most properties can buy.
Organic growth holds moisture against masonry. Clearing it early slows spalling, pitting and cracking.
Algae film on concrete is genuinely slippery when wet. Removing it removes a real slip hazard.
Sealant and stain bond to clean concrete. Washing first is what makes the next coat last.
Real results from properties across Indianapolis and the surrounding suburbs.
Before treatment.
After a single visit from our crew.
The sequence never changes. It is what keeps the result consistent from a single driveway to a full commercial site.
We walk the property with you, check what each surface can take, and ask what actually needs fixing.
Beds, fixtures, furniture and vehicles get covered or pre-rinsed before any solution goes down.
Full pressure on concrete and masonry. A low-pressure soft wash on roofs, siding, timber and anything delicate.
We rinse down, clear up, and walk the finished job with you rather than leaving an invoice on the porch.
If any of these sound familiar, it is worth getting a quote. None of them get cheaper by waiting.
Usually algae or embedded dirt rather than staining. Both come up under pressure.
Where the sun does not reach, growth takes hold first and spreads outward.
Driveways collect both. They need a degreaser step before the pressure pass.
Indiana road salt and spring pollen build up faster than most people expect.
Not when the pressure matches the surface. We test a small area first and adjust the tip and distance before we commit to the full run. Sound concrete handles it easily.
A standard two-car driveway is usually two to three hours including the pre-treatment dwell time. Larger or heavily stained surfaces take longer.
Both. A sodium hypochlorite and surfactant mix kills organic growth at the root so it stays gone longer. Pressure alone only removes what is on the surface.
Combining services on one visit costs less than booking them separately.
Heated water plus pressure. The right answer for grease, gum, oil and anything that has bonded to the surface rather than settled on it.
Surface-cleaner passes that leave concrete evenly clean, with no wand stripes and no missed lines down the middle of the slab.
Patios, walkways, steps, aprons and pool surrounds. Any poured surface, cleaned evenly and rinsed clean of the solution afterwards.
Public frontage, entryways and connecting paths cleaned of gum, grime and staining, with surface-cleaner passes that leave no stripes.
Send us the details and we will come back within one business day with a straight answer and a fair price.
No deposit needed. We reply within one business day.
