- (267) 626-5473
- abpressuresolutions@gmail.com
- Mon-Sun, 9 AM - 5 PM
Serving 17 Indianapolis-area communities
Serving 17 Indianapolis-area communities
Timber and composite decking cleaned at a pressure that will not raise the grain, leaving the boards ready for stain or sealant.
We reply within one business day. No deposit needed.
No deposit needed. We reply within one business day.
Wood is the surface where pressure washing does the most visible damage. Too much force furs the grain, gouges the softwood between the growth rings and leaves a permanent striped texture that no amount of stain will hide.
We soft wash decking instead. A wood-safe solution kills the algae and mildew, lifts the grey oxidised layer, and rinses off at low pressure. The boards come up clean and smooth, and the surface is properly prepared if you are staining or sealing afterwards.
Low pressure keeps the board surface smooth and splinter-free.
Stain bonds to clean, open timber. This is the step that makes it last.
Algae on decking after rain is one of the most common causes of a fall at home.
Composite boards clean well but scar easily under pressure. Soft washing avoids that.
Real results from properties across Indianapolis and the surrounding suburbs.
Before treatment.
After a single visit from our crew.
We walk the property with you, check what each surface can take, and ask what actually needs fixing.
Beds, fixtures, furniture and vehicles get covered or pre-rinsed before any solution goes down.
Full pressure on concrete and masonry. A low-pressure soft wash on roofs, siding, timber and anything delicate.
We rinse down, clear up, and walk the finished job with you rather than leaving an invoice on the porch.
If any of these sound familiar, it is worth getting a quote. None of them get cheaper by waiting.
Oxidised timber. It cleans back considerably.
Algae, and it is slippery when wet.
Mildew feeding on the organic filler in the board.
The sealant has gone. Clean first, then re-seal.
You can, and it is usually a mistake. High pressure raises the grain and leaves permanent marks. We soft wash decking, which cleans it just as well without the damage.
Allow 48 hours of dry weather so the timber can return to a normal moisture content. Staining damp wood is the most common reason a finish fails early.
It removes loose and flaking finish. A fully stripped result needs a dedicated stripper, which is a separate service we can quote.
Combining services on one visit costs less than booking them separately.
Both sides, top to bottom. Timber, vinyl and chain-link fencing brought back without splintering the boards or bleaching the panels.
Pavers, flagstone, poured concrete and brick patios, cleaned and rinsed so the space is usable again the same afternoon.
The black spotting on vinyl siding, painted trim, fencing and composite decking, cleared without bleaching the surface underneath.
The safe method for anything that is not masonry. Cedar, fibre-cement, stucco, vinyl and painted timber, cleaned at a pressure that will not mark the surface.
Send us the details and we will come back within one business day with a straight answer and a fair price.
No deposit needed. We reply within one business day.
